GBT-4-IW

Home » Page 2

Welcome to the PoE Texas Manual for the GBT-4-IW!

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new PoE Inwall Switch. 

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: GBT-4-IW.

What’s Inside

PARTS LIST: GBT-4-IW

  • 1 X Inwall Switch
  • 2 X Screws for mounting into gang box
  • 1 X front cover plate

**It does not include a gang box.

General Installation

Put it together:

You can connect any non-PoE, PoE (12 watt), or PoE+ (25 watt) device up to the power budgets listed above based on your PoE switch.

CONFIGURATION

There’s nothing to configure.  The GBT-4-IW will automatically network with your infrastructure to receive IP addresses and network protocols.

Technical Specifications

Product Specifications

Certifications CE, FCC, RoHS
Data + PoE Ports 4
Data Ports 1
Data Rate Gigabit
Dimensions Single Gang US Box
Display Type Blue LED Status Indicator
Input Voltage Range 44-56 volts through Uplink Port
Max Power for Kit 60 watts total
Mount Type In-wall
Operating Humidity 5% to 90%
Operating Temperature Range -10 – 45C
PoE Method IEEE 802.3bt/4PPoE (Uplink) / IEEE 802.3af LAN
PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
PoE Standard Injector: Passive 4 Pair PoE / Switch IEEE 802.3bt and IEEE 802.3af
PoE Standards Supported Single Signature IEEE 802.3bt Type 4

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!

The post GBT-4-IW appeared first on PoE Texas.