GPOE-1AB-Y

Home » Page 2

GPOE-1AB-Y

(PoE Gigabit Injector)

Welcome to the PoE Texas Manual for the GPOE-1AB that cost effectively upgrades any non-PoE switch or PoE switch to 60 watt passive PoE!

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan. 

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: GPOE-1AB-Y

What’s Inside

PARTS LIST:

  • 1X GPOE-1AB
  • 1X 2.1-2.1-Y CABLE

We do offer power supplies so you can select a power supply to fit your application needs or call us for a recommendation +1-512-479-0317.

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

 

NEED HELP PICKING A POWER SUPPLY?  USE OUR POE CALCULATOR TO CREATE A POWER BUDGET.

General Installation

CONFIGURATION

There is no configuration necessary with this device.  Simply plug it in.

The green LED indicates power on.   If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.

STEPS:

1 – Unplug the POE ports one at a time to determine which port is having the issue

2 – Troubleshoot the port to determine whether the cable or the device is grounded

Technical Specifications

Product Specifications

Data + PoE Ports 1
Data Ports 1
Data Rate Gigabit
Dimensions 1x1x2 in.
Max. Amps Per Port 650 mA
Mount Type wall
Operating Humidity 5% to 90%
PoE Method Passive
PoE Mode/Pinout Mode B (+4,5 -7,8)
PoE Standard N/A
Power Input 2.1mm DC Kits with: 24 volt 30 watt; 48 volt 15, 30 & 60 watt; 

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!

The post GPOE-1AB-Y appeared first on PoE Texas.