Here at InfoComm, SurgeX’s is showing the 1U Sequencer (SEQ-1U), a single rack unit power management surge protection, conditioning and sequencing solution for AV, broadcast and computer equipment. The SEQ-1U offers advanced protection for any size AV or IT installation.
Proprietary SurgeX technology in the SEQ-1U includes Advanced Series Mode surge elimination, a zero let-through technology that SurgeX says stops all surges up to 6,000 volts / 3,000 amps (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances. The unit also features both common mode and normal mode Impedance Tolerant EMI/RFI filtering and COUVS (Catastrophic Over/Under Voltage Shutdown), as well as SurgeX ICE (Inrush Current Elimination) to keep connected AV and IT products protected and fed with a continuous flow of power.
Programming of the SEQ-1U is made easy through a front panel LCD display with simple commands. The display also shows unit status and AC line voltage. In addition to protecting AV and IT equipment, the nine available outlets on the SEQ-1U can be used to control other SurgeX power management products or several SEQ-1Us can be connected to operate together for management of large datacenters or audio video installations. All set-up configurations are stored in non-volatile memory.
Build materials and industrial design of the SEQ-1U were carefully considered. A magnetic shielding steel enclosure makes the unit impervious to magnetic interference while a thermal circuit breaker provides overload protection. For added convenience, the SEQ-1U accommodates any type of control unit and provides DC voltage or contact closure feedback to Crestron, AMX and other similar control interfaces.
The SEQ-1U has a load rating of 20 amps at 120 volts and meets Federal Grade A, Class 1, Mode 1 (A-1-1) guidelines for powerline surge suppressors.
The SurgeX SEQ-1U is shipping now and you can get more info here.