GAT Series Splitters

Home » Page 3

PoE+ IEEE 802.3at Splitters

Welcome to the PoE Texas Manual for the GAT Line of PoE+ Splitters!

 The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Splitter. 

 Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

 Or you’re always welcome to leave questions or comments on our product pages: GAT-5v20w, GAT-12v25w, GAT-15v25w, GAT-19v25w, and GAT-24v25w.

What’s Inside

PARTS LIST: GAT-5v20w
  • 1 X POE SPLITTER

These all come with a female 5.5 x 2.1 mm DC barrel connector.

    PARTS LIST: GAT-12v25w
    • 1 X POE SPLITTER
    PARTS LIST: GAT-15v25w
    • 1 X POE SPLITTER
    PARTS LIST: GAT-19v25w
    • 1 X POE SPLITTER
    PARTS LIST: GAT-24v25w

    1 X POE SPLITTER

    General Installation

    Your new PoE splitter is designed to be simple to install and set up.  It comes with mounting screw tabs for a #4 wood screw which allows you to mount it easily on plywood or on DIN rail brackets. 

    Once it is in place, simply plug the RJ-45 end into an IEEE 802.3at PoE or 48-56 volt passive Power Sourcing Equipment (PSE) with a data source, and the other end into your device such as a camera, tablet, or any compatible device. 

    That’s it.  You device should immediately start charging.

    CONFIGURATION

    Technical Specifications

    Product Specifications

    Adapters included See Variation Options
    Certifications RoHS, CE
    Data + PoE Ports 1 (Input)
    Data Ports 1 (Output)
    Data Rate 10/100/1000
    DC connector 5.5 x 2.1 mm DC Female
    Dimensions 4.5 x 2 x 1 in
    Efficiency 90%
    Input voltage 44 to 56 volts
    Max Current 4,000 mA
    Max Power for Kit 20 or 25 Watts
    Operating Humidity 10 -90% non condensing
    Operating Temperature Range 0 – 40C
    Output Voltage 5/12/15/19/24 volts
    PoE Mode/Pinout Mode A/B
    PoE Standard IEEE 802.3at
    Weight 3.0 oz

    If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!

    The post GAT Series Splitters appeared first on PoE Texas.