GPOE-2B

Home » Page 2

GPOE-2B

(PoE Gigabit Injector)

Welcome to the PoE Texas Manual for the GPOE-2B that cost effectively upgrades any non-PoE switch or PoE switch to 2 ports of 30 watt passive PoE which allows you to connect any two PoE devices like a Point to Point Wifi Extender.

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan.

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: GPOE-2B

What’s Inside

GPOE-2B

PARTS LIST:

  • 1 X GPOE-2B

This Injector is sold without a power supply. 

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

 

NEED HELP PICKING A POWER SUPPLY?  USE OUR POE CALCULATOR TO CREATE A POWER BUDGET.

General Installation

CONFIGURATION

There is no configuration necessary with this device.  Simply plug it in.

The green LED indicates power on.   If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.

STEPS:

1 – Unplug the POE ports one at a time to determine which port is having the issue

2 – Troubleshoot the port to determine whether the cable or the device is grounded

Technical Specifications

Product Specifications

Data + PoE Ports 1
Data Ports 1
Data Rate Gigabit
Dimensions 1 x 1 x 2 in.
Input Voltage Range 12 – 56v DC
Max. Amps Per Port 650 mA
Mount Type Wall
Operating Humidity 5% to 90%
PoE Method Passive
PoE Mode/Pinout Mode B (+4,5 -7,8)
Power Input 2.1 x 5.5 mm DC
Power Supplies None
Weight 1 oz

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!

The post GPOE-2B appeared first on PoE Texas.